Tang Zhiguo has an order, and Minister Zhao from the Technical Department of Risheng Company came over quickly and walked over quickly, "Mr. Tang, are you looking for me?"

Tang Zhiguodao: "Minister Zhao, look at the processing technology card of this counting process to see if there is any problem?"

Hearing this, Minister Zhao picked up the processing technology card and looked at it carefully. After reading it, Minister Zhao said: "Mr. Tang, I think there should be no problem with this processing technology card. The process steps, process parameters, and operation methods are very detailed. According to our company's technical strength, we can't prepare such a level of processing technology regulations. ￡∝,"

Tang Zhiguodao: "Minister Zhao, is there really no problem?"

Minister Zhao said: "There should be no problem, but the key is to try it out before you know it. According to the process requirements, you will know it."

Minister Wang of the manufacturing department next to him looked at each other and Master Yang of the counting worker. Minister Wang said, "Minister Zhao, there must be problems with the process regulations. With such a high turning speed, a counting blade requires 6 parts, or even 11 parts. I don't believe it anyway."

Master Yang, a counting worker next to him, also said: "Minister Zhao, based on my years of processing experience, with such a high turning speed and such a large feed, a blade may be scrapped if it cannot be processed. Where can I process 6 parts? It's a fool."

Minister Zhao smiled bitterly.

Tang Zhiguodao next to him: "Minister Zhao, do you think the process parameters in this process regulation are reasonable?"

Minister Zhao said: "I can't say anything. I have not used such processing parameters to process parts. You have to try it out before you know everything."

Thinking about it, Minister Zhao added: "Mr. Tang does not mean that the lower the turning speed, the smaller the feed. The turning tool can process more parts. Sometimes, high-speed large feed turning is used. As long as the parameters are selected reasonably, the same turning tool can show amazing economic benefits."

"Oh." Tang Zhiguo asked, "There is such a thing?"

Minister Zhao said: "Of course. The smaller the turning speed, the smaller the feed volume, and the slower the turning tool wears. This is generally true. However, in this way, the same part may be processed in just one minute with high-speed large feed turning. However, when you use low-speed small feed turning, it may take more than ten minutes to process a part. In this way, the problem arises."

After stopping and sorting out the ideas, Minister Zhao said: "For the same blade, high-speed large feed turning, the life of the blade may be five minutes, and one part can be processed in one minute. One blade can be processed in five parts; if a low-speed small feed turning is used, the life of the blade may be a little longer. It may be ten minutes, but because of the slow processing speed, one blade may only be processed in one life cycle."

After Minister Zhao finished speaking, Tang Zhiguo pointed a little, "Minister Zhao, what he said makes sense. Why don't we give it a try."

Minister Zhao nodded and agreed: "Mr. Tang, let's try the processing technology of Tianfeng Technology Company and you will know everything."

Minister Wang of the manufacturing department next to him hurriedly said: "Mr. Tang, don't. This batch of retaining ring parts from Tianfeng Technology Company has a total of 56 pieces, and we are required to deliver 56 qualified parts. If you try this, what if the parts are scrapped?"

At this moment, Tang Zhiguo showed great courage and waved his hand and said, "It's done according to the process regulations of Tianfeng Technology Company. It's decided. If there is any problem, I will go to Tianfeng Technology Company to explain it myself."

Just settled down!

Master Yang shook his head gently, not optimistic about the process regulations of Tianfeng Technology Company. However, Tang Zhiguo said so, so he must have to do it.

According to the process requirements of Tianfeng Technology Company, Master Yang operated step by step, adjusting the tool, adjusting parameters, correcting the correcting, etc. Everything was more skillful and everything was ready. Close the safety door of the CNC lathe, press the start button, the machine tool started the process, and started turning parts.

The turning speed is very fast. From the reaction of the machine tool, we can see that this is a domestic CNC lathe, which is incomparable to imported high-end CNC lathes. Now it is high-speed large feed turning, and the reaction of the machine tool is a bit large. Fortunately, it does not affect processing, and it is within the allowable and normal range.

Tang Zhiguo, Minister Wang, Minister Zhao and others were all next to this machine tool. Everyone was watching the processing of parts, and everyone had different mentalities. Tang Zhiguo and Minister Zhao of the Technical Department were nervous and worried about the failure of processing. Minister Wang of the Manufacturing Department had a positive attitude and had long thought that such processing would definitely lead to problems.

The processing was very fast. In just two or three minutes, the part on the machine tool was processed. The tool holder began to withdraw the tool, the program stopped, and the machine tool stopped.

As a number-driver with many years of experience, Master Yang has been watching the processing situation. Seeing that the processing sound has always been very normal and the processing was completed so quickly, he couldn't help but feel a little surprised.

The processing speed is so fast!

After a slight stunned, Master Yang opened the airport security door and used a wind gun to blow the coolant on the parts. He first looked at the parts and looked at the turning knives, and his face looked even more surprised.

No way!

Master Yang almost exclaimed. Seeing Master Yang's expression, Tang Zhiguo felt nervous and thought to himself, is there something wrong? So he immediately asked anxiously: "Master Yang, is there something wrong? Are the parts scrapped?"

Master Yang was surprised and sighed. He immediately admired Tianfeng Technology Company and said in admiration: "Mr. Tang, the parts are processed very beautifully and the tool loss is very small. This processing technology regulation is amazing!"

"Really." Hearing this, Tang Zhiguo was surprised. He immediately stepped forward a few steps, came to the machine tool, and looked at the part that had just completed the process seriously. After seeing this, the look of surprise on his face became even stronger.

"Excellent, amazing, worthy of being Tianfeng Technology Company." Tang Zhiguo also felt a burst of admiration in his heart.

At the same time, Tang Zhiguo felt a burst of happiness, and fortunately, he just processed according to the processing technology regulations provided by Tianfeng Technology Company.

Minister Wang of the manufacturing department next to him also looked confused and looked up, and personally looked at the processing of parts and the wear of the tool. After looking at it, he thought to himself, it's impossible, it makes no sense, how could this happen?

Tang Zhiguo was in a good mood and didn't care about Minister Wang. He waved his hand and said, "Master Yang, continue processing, let's take a look at the subsequent processing myself."

The processing was very smooth and the processing speed was so fast. In addition to his admiration for Tianfeng Technology Company, Master Yang immediately started processing the second part.

Such processing was almost out of control. In less than half a day, the processing of this batch of 56 parts was successfully completed, and all of them were successfully completed. It was very smooth. In addition, the processing quality of parts was first-class, all of which were qualified, and no one exceeded the limit.

After finishing the processing of these parts happily, Master Yang said: "Mr. Tang, I can't believe that there is such a process procedure. According to such a process, we can process first-class quality parts, and the speed is very fast and the tool loss is very small."

Tang Zhiguo was always next to the machine tool, watching all the parts complete the processing of this process. At this moment, Tang Zhiguo was no longer worried. On the contrary, he felt a burst of joy in his heart and even more thoughtful.

The processing speed is so fast, the tool loss is so small, and the processing quality is so good. Tang Zhiguo, who was worried about losing money, was shocked by a rough calculation. If he continues to process like this, he will not lose money. Not only will he not lose money, but on the contrary, he also has good profits.

Tianfeng Technology Company is really amazing!

In addition to admiring Tianfeng Technology Company, Tang Zhiguo thought in his heart that Tianfeng Technology Company has such technological strength, then their profits in processing parts will be very high. If their Risheng Company one day can reach the technical strength level of Tianfeng Technology Company, no, as long as it reaches half the level, then...

Tang Zhiguo couldn't even imagine it...

…………

Tianfeng Technology Company.

Since the bid was successfully completed at Guobin Hotel last time, it has been more than half a month, and a lot of information has also been reflected in Li Tianfeng.

Many companies that carry out parts processing for Tianfeng Technology Company complain that they lost all their pants and asked for increased processing costs, otherwise the processing would not be able to continue.

Some companies also complain that the parts requirements are too high and difficult to process, and the processing quality is difficult to guarantee, so they require a certain amount of waste quota for parts.

In the first few days, Li Tianfeng was puzzled that these parts were processed at Tianfeng Technology Company. They were in good condition, with excellent quality, and were all of them that were relatively easy to process and had relatively low technical content. How did these companies have problems?

Could it be that the environment is not suitable for the local environment?

After a few days of wondering, Li Tianfeng vaguely understood the reason, so he ordered Zeng Qinghai to send out several craft teams to go to these complaining companies to conduct craft inspections. After this investigation, Li Tianfeng said in his heart, indeed.

It turns out that these companies failed to strictly follow the mechanical processing technology provided by Tianfeng Technology Company, and changed the processing parameters without authorization, and even process plans are common. They process as they think it is reasonable and convenient. In this way, the problem naturally arises.

Tianfeng Technology Company's processing process regulations have been verified by countless batch parts processing. They are very mature and perfect, so how can they be changed at will?

So, Li Tianfeng had to send several process guidance teams to these factories to correct one by one. What surprised Li Tianfeng was that there was only one company called Risheng Machinery Processing Company. Not only did he not complain, he also called the good news.

…………

Today's third update, the third update is here! (To be continued...)
Chapter completed!