In the international military industry, the J-30 fighter is widely known, and this fighter has become a hot topic. However, no one knows the specific parameters and performance of the J-30 fighter.

Many enthusiasts have conducted various analysis of the J-30 fighter jets, but this analysis is more speculation. Based on speculation, many people have released various data on the J-30 fighter jets. At present, there are multiple versions of popular ones, both internationally and domestically.

Some people believe that the J-30 fighter is definitely a very outstanding fighter, and its performance is definitely above the US F22 fighter, which is mainly the view of most people in China.

Everyone analyzes that since there is already a J-20 fighter and now it is developing a J-30 fighter, this fighter will definitely be far ahead of the J-20. Otherwise, the country will not launch the development of such a fighter.

In some military forums and some aviation industry forums, many enthusiasts have published a series of data obtained by their "analysis" and published it online for everyone to discuss.

Internationally, there are many people who are optimistic about the J-30 fighter jet, but more people who are not optimistic about the J-30 fighter jet, especially the United States and Japan, who are often ridiculed.

A famous Japanese newspaper published a large number of articles, which clearly pointed out that with China's national strength, it is simply a delusion and completely impossible to develop a new fourth-generation fighter jet that surpasses the F22.

This argument has a very good market in Japan, and many so-called Japanese analysts even said that China is wasting financial resources.

American side.

A new promotional video about the F22 fighter jet is popular on some European and American military websites. The promotional video is very attractive, and the F22 fighter jet has also attracted a lot of attention.

Faced with the J-30 fighter jet, the United States has widely publicized its F22 fighter jet.

In the US President's Office, an intelligence officer is reporting, and the subject of the report is the J-30 fighter jet.

After listening to the report, the US president asked: "According to your analysis, how does the J-30 fighter jet developed by China compare with our F22 fighter jets?"

The reporter said: "His Excellency the President. According to our analysis, the J-30 fighter jet should be inferior to our F22, and this fighter jet has limited threat to us."

Hearing this, the US President nodded slightly with confidence.

………

Tianfeng Technology Company.

Li Tianfeng is free in his work and will also pay attention to news on the Internet, especially in his opinion, he likes to log in to some military and aviation industry sections.

Li Tianfeng knew about the hot discussions about the J-30 fighter jets on the Internet and some international arguments about the J-30 fighter jets. When he saw the ridicule of Japan, Li Tianfeng sniffed it.

Li Tianfeng thought to himself, how can you guess the J-30 fighter jet? The comprehensive performance of the J-30 fighter jet is far from what you imagined.

Should I fight back? Li Tianfeng thought to himself.

Li Tianfeng had this idea, and the military basically did this. So, "Zhang Daxia" posted a post in a famous military forum in China.

This is a post about the J-30 fighter. Although the performance parameters of the J-30 fighter are still not announced, the 3D color picture of the J-30 fighter was released for the first time.

As soon as the post was released, it immediately became a hot topic.

"Wow, it turns out that this is our J-30 fighter jet, it is so beautifully designed!"

"Yes, it's much beyond my imagination. This design is much more beautiful than the J-20 and F22 fighter jets."

"This is a twin-engine heavy single-seat fighter, undoubtedly! It's definitely excellent in performance, I don't know when the first flight will start!"

""

As soon as the 3D color picture of the J-30 fighter was released, everyone's first impression was that this fighter was designed very beautifully. Some people who are familiar with this knowledge found that this fighter has a very advanced aerodynamic design through the analysis of these 3D color pictures.

With such advanced aerodynamic design, its overall overall performance will definitely not be bad. Those who have been mocking this fighter before shut up!

Soon, the United States, Japan and other countries sang the theory of China's threat and advocated that the development of the J-30 fighter jet is not conducive to world peace, especially the stability of Northeast Asia.

You guys. When you first developed the F22 fighter jet, why didn't you consider it that it would affect the world's peace and stability and threats to other countries? You just ignored this argument.

The scientific research and production of Tianfeng Technology Company is not affected at all. The design of the J-18 fighter is orderly, and the trial production and testing of the J-30 fighter are progressing steadily and progressing relatively quickly.

Such as avionics systems, seat ejection systems, radars, etc., have entered the test stage. The trial production of various aircraft parts has been fully entered into the second or third batch.

Some parts even undergo various test stages, such as stress test, fatigue test, environmental adaptation, etc.

The turbofan 25b is the fastest developed, and the first turbofan 25b engine is being assembled in the engine assembly workshop.

On the assembly bench, several assembly workers were skillful in their movements and were skillful in assembling. Overall, there was little difference between the turbofan 25b engine and the turbofan 25a engine, but some of them had been modified and improved, and the appearance did not look much different.

Because there is not much difference and everyone is skilled in assembly, when Sun Xiaoping brought a few design backbones to see the assembly situation, the turbofan 25b engine had been assembled nearly half.

As the chief engineer of the turbofan 25b engine design, Sun Xiaoping naturally knows where the technical points of assembly are, and the key points should be to look at what places.

After looking at everyone's assembly in a very targeted manner, we saw that after the components were installed on the engine, all technical requirements were fully met, and several assembly workers were also very careful. Sun Xiaoping was relieved.

Next to this turbofan 25b engine, Sun Xiaoping watched it with everyone for almost half a day, and was satisfied and relieved. During this half day, the engine completed the assembly of the combustion chamber, compressor, fan, and was ready to enter the turbine, accessories, etc.

City South Base.

In the workshop No. 6 inspection point, an inspector and technician were inspecting the second batch of finished parts. This is a support piece, "Hercules" material, the parts are light and thin, but can withstand a lot of force. From the design of the parts, it can be seen that there are many reinforcement ribs on the parts.

After inspecting this batch of five parts, the inspector said: "Mr. Liang, this batch of parts is much better than the first batch. Look, two of the five parts are completely qualified, and the other three parts are not much different in size."

The beam man took the inspection record and looked at it. The three parts with excessive deviations were all the parts with a few general dimensions, and the deviation was not serious.

When the first batch of parts were processed, all of the parts were out of the limit, and there was an important dimension.

The important sizes are out of the limit, and the out of the limit is quite serious. The trial processing of the first batch of parts was scrapped. After analysis and process improvement and improvement, the processing quality of the second batch of parts was much better. Two of the five parts were qualified, and the other three were not out of the limit, and the quality was OK.

………

No. 2 assembly workshop.

Compared with the No. 1 assembly workshop, it is a little smaller here, but this "small" is also relatively small, but it is a little smaller than the No. 1 workshop. Compared with other workshops, it can still be described as huge here.

Here, the first static test aircraft of the J-30 fighter is being assembled. This is basically not an aircraft, but just a skeleton, with many things not available, but it no longer affects the static test.

The J-30 fighter uses integrated design in structural design. This test is to verify the structural strength, verify the rationality of the design, etc.

Several technicians were guiding each other, and several assembly workers were busy. Everyone assembled structural parts one by one according to the process requirements.

Li Tianfeng, Zhou Yiding and Lei Yong walked into the No. 2 assembly workshop together. The huge workshop was very empty, and the ground could see people. At first glance, you could see this static test machine that was being assembled.

Just now, Li Tianfeng, Zhou Yiding, Lei Yong and others have just completed the internal design review of the J-18 fighter. After several months of design, the J-18 fighter has basically completed the design and will be designed and improved after the internal review.

It is estimated that the J-18 fighter will be able to complete the comprehensive design work within a maximum of no more than one month, and will usher in design evidence collection.

The J-18 fighter has an export type and a military-specific model. The export type is basically completed quickly, and the design of the military-specific model will not take long.

When he walked into the No. 2 assembly workshop and saw this static test machine, Li Tianfeng praised: "Mr. Zhou, Mr. Lei, in the past two months, our development progress has been significantly faster, thank you for your hard work."

Zhou Yidingdao: "Boss, everyone has put in full force recently. We must develop the J-30 fighter jet as soon as possible. We are quite satisfied with the progress."

Everyone is full of energy, and with various rewards, they are progressing rapidly. Of course, the most important thing is that they have not taken detours and encountered difficult technical problems. A series of technical problems have basically been cleaned up by Li Tianfeng, and the development work has been smooth.

Walking next to this static test machine, although it looked a little "ugly", Li Tianfeng nodded with satisfaction.

The appearance is ugly mainly because many things do not need to be assembled, but the main body is already there, which does not affect the experiment.

Ding Dao on Monday: "Boss, you can complete all assembly in three days, and then enter a static test to inspect the structural design of the J-30 fighter jet."

Li Tianfeng nodded, looked at the workers' assembly for a while, then took two steps forward, carefully looked at the assembly parts, especially some screws and nuts that had been tightened, etc.

Li Tianfeng was watching the assembly situation seriously. His phone rang. He took out his phone and saw that it was Liu Wei's phone call. Li Tianfeng pressed the answer button without hesitation.

Li Tianfeng said: "Mr. Liu, what's wrong?"

………

Two updates today, the first update is here! (To be continued.)
Chapter completed!