Such a large group of people had a very large formation and attracted a lot of attention. Many workers looked at him from afar, and they all guessed in their hearts which big leader was here.

Li Tianfeng's eyes were calm. Looking at this attitude, Li Tianfeng guessed that this might be Zhu Maohua, the newly appointed chairman and general manager of Factory E. Li Tianfeng stood calmly next to the bed.

This imposing middle-aged man is indeed Zhu Maohua, the newly appointed chairman and general manager of Factory E. He is absolutely authoritative in Factory E. Zhu Maohua has been in office for some time, but today is his first time to come to the precision machining center.

I know that the precision machining center is responsible for the processing of most key parts of the turboshaft C engine of key models. I heard that I encountered a big problem in the processing of the first to third-stage compressor blades a few days ago. I heard that it was successfully solved later.

This time I heard that there was a problem with the first-stage turbine disc that was started by the turboshaft C, so Zhu Maohua was about to come and take a look, and by the way, he also took a look at the precision machining center, which brought together a large number of cutting-edge equipment in the entire E factory.

When he walked to this vertical pull-up bed, Zhu Maohua saw the semi-finished turboshaft C next to the machine tool to start the first-level turbine disc. After looking at it with interest, Zhu Maohua asked: "Mr. Yang, is this the first-level turbine disc that turboshaft C starts the first-level turbine disc?"

Yang Xianfeng, deputy general manager and chief engineer, immediately said: "Mr. Zhu, this is the first-level turbine disc that turboshaft C is starting. It is now a semi-finished product, and is waiting for the broking process here."

Zhu Maohua said: "I heard that there are four parts in total in this batch, and one piece has been scrapped in this broaching process?"

Several leaders of the precision machining center around the periphery, such as Peng Xuehai, Cheng Gang, and Chen Xiangchun, all blushed. They really don’t go out, but bad things spread thousands of miles away. They scrapped a piece of parts, but even Zhu Maohua knew about it.

Yang Xianfeng said: "I encountered some problems in the broaching process for the time being, but we will concentrate our technical forces to overcome this problem."

Upon hearing this, Zhu Maohua gave an instruction: "Then we must solve this processing problem as soon as possible and process these three parts as soon as possible."

Everyone naturally remembered Zhu Maohua's instructions. When Li Tianfeng saw so many people, his standing position was a little conspicuous, almost standing next to Zhu Maohua, Li Tianfeng couldn't help but prepare to retreat to the side.

However, Zhu Maohua's energy is indeed too great and has a strong aura. There are many leaders around him. Li Tianfeng couldn't retreat even if he wanted to retreat. However, he immediately attracted Zhu Maohua's attention.

Seeing that there was no tension in Li Tianfeng's eyes, Zhu Maohua couldn't help but be surprised. He glanced at Li Tianfeng for a little more, and then said calmly: "Young man, you are the technician in charge of this broaching process."

Now, Cheng Gang, technical director of the precision machining center, has handed over the problem of the turbo disc to himself, so he can be regarded as the supervisor technician of this broaching process. Thinking of this in his mind, Li Tianfeng nodded and said, "Hello Mr. Zhu, I am Li Tianfeng, the supervisor technician of this broaching process."

"Xiao Li, tell me about the situation of this broaching process. Can you raise any difficulties?" Zhu Maohua's tone was very calm, with a bit of affection and affinity.

Li Tianfeng said: "The first part was not my hand. I only had a little understanding of the processing situation at that time. I was thinking about the subsequent processing of the three parts. Although the problem was relatively difficult, I was still more than 80% sure."

Huang Xuewen, deputy director of the Engineering and Technology Department, squeezed over and said loudly: "You are a newcomer who has only been working for three years. You will definitely not be able to solve such processing problems. The precision machining center is also a mess. Such an important thing is left to you. If you scrap another part, who can be responsible."

Li Tianfeng did not expect that Huang Xuewen actually appeared, and he had a bad tone, and he accused him loudly. You know, the new chairman and general manager of E Factory are here. Sure enough, Zhu Maohua frowned slightly, obviously because he was a little dissatisfied with Huang Xuewen.

Li Tianfeng knew very well that Huang Xuewen must have wanted to show off his face in front of Zhu Maohua, but if he did this, he would probably have messed up.

Huang Xuewen may have suddenly realized that he was a little impatient. He really wanted to show his feelings in front of the new leader. Now it seems a bit uneasy, because Huang Xuewen himself noticed that Zhu Maohua's brows were slightly frowning.

So, Huang Xuewen, who was eager to recover, immediately said: "Mr. Zhu, the turbo disc broaching process of the turboshaft C engine is very difficult, and it is the first time we have encountered powder metallurgical high-temperature alloy. If it is handed over to a newcomer, it will definitely cause big problems."

Zhu Maohua's brows frowned even deeper, and his tone was a bit cold and harsh: "Who are you?"

Yes, who are you and what are you? There are so many leaders around you who didn’t say anything, and you, a little leader, just jumped out, let alone Zhu Maohua really doesn’t know Huang Xuewen.

When Huang Xuewen saw Zhu Maohua's tone was cold and stern, his heart was shocked, and he almost frightened his cold sweat. He stuttered and was about to say that he was Huang Xuewen, deputy director of the Engineering and Technology Department. Unexpectedly, before he could speak, Zhu Maohua waved impatiently.

Seeing so many people, and the giants in Factory E, Huang Xuewen's face turned red with a frustrated look, and his mouth opened several times, but he didn't dare to say anything else.

Seeing this, Li Tianfeng felt happy and wanted to laugh out loud. He really wanted to laugh three times. The joy in his heart was like June day drinking cold ice water. Suddenly, Li Tianfeng looked at Huang Xuewen with a smile on his face.

After Zhu Maohua waved his hand, he didn't care whether Huang Xuewen was turtle or not. After waving the annoying Huang Xuewen, Zhu Maohua changed into a kind face, even with a smile, and his tone was very peaceful.

"Xiao Li, you said that the subsequent processing is difficult. Can you tell me what is the difficulty?"

Li Tianfeng thought for a moment and replied: "Mr. Zhu, the difficulty of processing lies in our equipment. Our vertical pulling bed is a bit old, the stroke is short, and the power is slightly insufficient, which leads to a little insufficient tension. In addition, the pulling bed accuracy is a problem."

Upon hearing this, Zhu Maohua said, "Can you change a better device?"

Yang Xianfeng, deputy general manager and chief engineer next to him, took the topic and said, "Mr. Zhu, you may not know much about the situation of our factory just now. Due to the technology blockade abroad, it is difficult for us to buy high-precision CNC pulling beds. This pulling bed in our factory E is quite good. Even if you want to change a better pulling bed, there is no pulling bed to replace."

Suddenly, Zhu Maohua stopped talking and began to ponder. After a long time, Zhu Maohua said: "I will think of a solution to equipment in the future. At present, our key is to process the first and second-level turbine discs of the turboshaft C engine as soon as possible."

The turbine shaft C engine has two stages of turbines. Both the first and second stage turbine discs have completed the preliminary related processing at the precision machining center. Because there was a problem with the first stage turbine disc in the broking process, the second stage turbine disc also stopped before the broking process.

Peng Xuehai, director of the Precision Machining Center, stood quietly aside. At this time, he seized the opportunity to speak, "Mr. Zhu, our Li Tianfeng is good. The processing problem of the first to third stage compressor blade plates of the turboshaft C engine in front was solved by Xiao Li."

Li Tianfeng solved one processing technology problem after another. Liu Qingshan, the deputy chief engineer next to him, recently appreciated Li Tianfeng, so Liu Qingshan took the opportunity to say: "Mr. Zhu, Comrade Li is really good, but he has solved many processing technology problems recently."

As the deputy chief engineer of Factory E, Liu Qingshan spoke a little heavy-heartedly. After saying this, Zhu Maohua looked at Li Tianfeng seriously. Next, Zhu Maohua's actions were greatly unexpected.

Zhu Maohua changed into a smiling face and patted Li Tianfeng on the shoulder kindly and said, "Young man is good. We will not treat people with technical skills unfairly. We will do our best to solve the broaching of the first and second-level turbine discs."

After saying that, Zhu Maohua said to Liu Qingshan next to him: "Mr. Liu, in terms of technology, you can give young people more opportunities to exercise and provide more support."

Everyone looked at Li Tianfeng enviously. Unexpectedly, the one who was the most popular among this group of people was Li Tianfeng. Not only did he receive high praise from the new E factory top leader, but he also left a good impression in the mind of the top leader.

Li Tianfeng was in a good mood, and thought to himself that this was a good show of his face.

Li Tianfeng said: "Mr. Zhu, I will do my best. If there are any difficulties, I will look for Mr. Liu and Director Peng."

"Okay, okay." Zhu Maohua seemed very happy and patted Li Tianfeng's shoulder kindly.

Liu Qingshan and Peng Xuehai also looked at Li Tianfeng with approval. They knew that Li Tianfeng was repaying their favor. They just said something to Li Tianfeng, and Li Tianfeng immediately mentioned their names in front of Zhu Maohua.

Around the surroundings, the envious eyes could almost swallow Li Tianfeng. Everyone thought to themselves, it would be great if they were Li Tianfeng. Li Tianfeng's luck was really good to leave such a good impression in the mind of the new head of the E Factory.

Zhu Maohua was in a good mood. With everyone's support and accompanying, he inspected the entire precision machining center with great enthusiasm. Before leaving, Zhu Maohua gave the precision machining center full affirmation, which made Peng Xuehai very happy.

...

Back in his office, Zhang Can, He Baitao and Li Dawu stood up one after another, smiling and congratulating Li Tianfeng. Zhang Can even said, "Brother Li, I envy you so much. I heard that Mr. Zhu admires you very much."

Li Tianfeng said: "Don't envy me either. Although I showed my face in front of the leader this time, the difficult task followed. We must do our best to solve the broaching problem of the first and second stage turbo discs of the turboshaft C engine."

………

Thank you again to the readers of "Novel Hobbies" for their third reward!!!

In addition, in the new book period, everyone needs clicks, recommendation votes, collections, and hopes for everyone’s strong support!!!
Chapter completed!