On the eighth day of the first lunar month, Tianfeng Technology Company officially started working.

On the first day of work, early in the morning, around 7:30, Li Tianfeng led a team, a group of senior leaders from Tianfeng Technology, wearing brand new and neat work clothes, stood neatly at the entrance of the main factory to welcome the employees to work.

Li Tianfeng smiled and watched his employees happily go to work. From time to time, he would also congratulate everyone on Happy New Year!

When the employees at work saw their bosses and a group of middle and senior leaders standing neatly at the factory gate, greeting them with a smile and congratulating themselves on a happy New Year, everyone's mood suddenly became full of joy and happiness!

"Bang, bang, bang..."

The loud noise of fireworks raised the atmosphere to a great level. This time, on the first day of work in the New Year, Tianfeng Technology Company prepared a lot of fireworks. At this time, under the guidance of Security Minister Cai Bin, fireworks were being set off.

"Wow! So beautiful!!!"

Even in broad daylight, everyone can still vaguely see the beauty and spectacularity of the fireworks, and many employees looked in the air with relish.

"The fireworks are set off, two words - grand!!!"

Many employees immediately praised the beautiful and spectacular fireworks when they saw this beautiful and spectacular fireworks. Many employees gathered in some empty places in the factory area of ​​Tianfeng Technology. Everyone's faces were full of spirits, and they were obviously very happy and proud.

The fireworks lasted about twenty minutes. At about eight o'clock, Li Tianfeng waved his hand and took everyone to the team and returned to his post. Next, he was to distribute New Year red envelopes to the employees.

Liu Wei has prepared these red envelopes long ago. Today's red envelopes are distributed, so many people cannot do it personally. Instead, they are handed over to the heads of various departments to distribute them themselves. This is also a good opportunity for everyone to get closer to their employees and establish their prestige.

For example, Zeng Qinghai received a large handful of red envelopes and happily returned to his own process and technology department. The No. 1 production workshop has the most employees, and the workshop director Tan Ke happily received nearly 200 red envelopes and happily went to No. 1 production workshop.

Today is a happy day. It is also a festive day!

The employees who received the red envelope were so happy that the whole atmosphere was coming, and everyone's faces were filled with joy.

"Wow! Six hundred yuan!"

"Yes, satisfied!"

"Such a thick red envelope. The boss is generous!"

"Haha, go and have a good drink after get off work!"

In the morning, Li Tianfeng walked to various subordinate departments, visited everyone, and sent out a lot of red envelopes. When the employees saw Li Tianfeng, they were all happy and greeted him. Boss, Happy New Year!

After walking around his company, I visited everyone. At about 10 o'clock in the morning, Li Tianfeng went to the e-factory again and sat in the offices of Zhu Maohua, Hu Lianggu, Yang Xianfeng, Liu Qingshan and others, and at the same time, he gave him a small gift he had prepared long ago.

Of course, Li Tianfeng also went to the precision machining center of e Factory, sat down at the offices of Peng Xuehai, Cheng Gang and others, and also saw his former colleagues.

When colleagues in the past saw Li Tianfeng, they were full of joy, and even a little envious and complimented. After all, Li Tianfeng is no longer the young technician he used to be, but the boss of a large company.

In the afternoon, Li Tianfeng returned to Tianfeng Technology Company and knew that today was the first day of work in the New Year, and everyone basically didn't have to work. Li Tianfeng did not go to the production site for a walk or a walk, but was in his own office.

I originally wanted to further improve the outline of the turbine shaft design, but Li Tianfeng quickly stopped because his subordinates came to his office one by one and expressed his New Year's congratulations to him in the name of reporting on his work.

The first day of work passed like this. On the ninth day of the first lunar month, Tianfeng Technology Company officially got on track, and the production atmosphere gradually came up. Workshop No. 1 began to be in full swing, with the machine tool roaring, and everyone was full of energy.

As soon as he went to work in the morning, Li Tianfeng held a meeting of middle and senior leaders, and as soon as he entered the production site, he obviously felt this atmosphere. Li Tianfeng was very happy and very satisfied.

New Year and new atmosphere, this year is a year full of hope.

Thinking that he was preparing and further improving the design outline, Li Tianfeng felt that he seemed to be full of energy and full of energy!

The processing of the turbo shaft c flame drum continued. Before the Spring Festival, the finishing of a flame drum was completed, and the processing quality was excellent. Li Tianfeng's new process, which took a different approach, was completely reasonable and feasible. The next five flame drums began to continue processing immediately.

While Li Tianfeng was patrolling in the No. 1 workshop, he happened to pass by the German precision counting vehicle. Seeing Master Zhou being serious about processing, he couldn't help but nodded slightly, and did not disturb him. Instead, he just looked around. Judging from the working conditions of the machine tool, everything was normal.

In addition to the processing of the turboshaft C flame barrel, the list Li Tianfeng gave to Zhu Maohua last time included dozens of part drawing numbers in the mass production model of factory e. Among them, some parts blanks have arrived at the Tianfeng Technology No. 1 processing workshop.

Even some parts have begun roughing the blanks, such as the blanks of the ninth-level roulette wheel of the turbofan b compressor are beginning to roughing the blanks.

The turbofan B compressor is a subsonic compressor with a total of nine levels. The materials of each part are basically made of titanium alloy, such as titanium alloy tc4. The ninth-level compressor roulette also uses titanium alloy material. Among the nine-level roulettes in the compressor, the finished product has the largest diameter, with a maximum diameter of 275 mm. There are tongues and grooves for mounting blades on the outer circle. There is a circle of 32 precision positioning holes distributed on the inside to install tension bolts. In addition, the wall thickness of the parts is very thin, and the wall thickness of the thinnest part is 21 mm, which is easy to produce processing deformation, and is one of the more difficult parts to process.

The dozens of parts drawing numbers that Li Tianfeng wanted to come from factory e are all relatively difficult to process, and this ninth-level roulette is just one of them.

"Master Ding, how is the processing situation?"

Seeing a CNC lathe being roughly processed the roulette, Li Tianfeng stepped forward and asked with concern.

Master Ding, a worker who was undergoing processing, recognized Li Tianfeng and immediately said: "Mr. Li, the processing is very smooth. Look, this is a finished part."

There were several parts that had been finished roughly processed in the wooden box next to it. The parts were not heavy. Li Tianfeng picked up one, looked at it carefully, and even used a caliper to measure several more important sizes. The parts were processed with good quality.

Li Tianfeng said: "Yes, although rough processing is not difficult, it cannot be taken lightly. You must strictly follow the process regulations and do not be careless."

Worker Master Ding nodded, "Mr. Li, don't worry, keep following the process regulations."

"Yeah." After nodding, Li Tianfeng thought to himself that rough processing of this part is not difficult. The key is the finishing processing later, which is a test for everyone. When the finishing process is entered, he will come and take a look in person.

After inspecting the processing site, Li Tianfeng returned to his office and began to carefully prepare the design outline.

For several days in succession, Li Tianfeng's main energy was to prepare the design outline, improve the various parameters, configure some basic sketches, and even make a lot of improvements in the overall performance, new materials and new design of the engine.

...

e Factory, sheet metal workshop.

On the inspection platform in the incoming material inspection area, there are neatly arranged, and a total of six turbo-axis c flame drums are placed. This is a flame drum that has completed all finishing processes and only waits for laser drilling. That is to say, as long as the laser drilling is completed and thousands of small holes are processed with laser on the flame drum, the flame drum is the final product.

Before laser drilling, the sheet metal workshop naturally needs to conduct a routine inspection and check all the relevant sizes, technical requirements, etc. again. This is a convention.

Inspector Master Zhao was wearing snow-white gauze gloves and holding a measuring gauge. He was checking carefully. While checking, the surprises on his face continued.

"It's impossible. All of this size are qualified. All six parts, without exception, are qualified!" Inspector Master Zhao looked surprised.

The turbo shaft c flame cylinder has not been inspected before. In the past, before, before the flame cylinder came to undergo laser drilling, it was inspected by the inspector. In the impression of this inspector, the size of the flame cylinder that comes to the sky has basically not been qualified and is always exceeding the limit.

"Old Zhao, what's the matter like fussing?" Not far away, an inspector was checking another part. Seeing that the inspector Lao Zhao looked surprised, he couldn't help but ask curiously.

"Old Zheng, come and see, these six turboshaft C flame tubes are all qualified, and even this key size is not out of reach!"

"Oh, is there such a thing?" Lao Zheng is also one of the old experienced inspectors. He knew the quality of the turboshaft C flame tube in the past, but he had basically never passed the quality. Now, all six flame tubes are qualified.

"No, all qualified!"

Lao Zheng said: "Our factory can finally process this part to the point where it is qualified. It's great, great." Obviously, Lao Zheng also knows the difficulty of processing these parts.

"Lao Zheng, these are not processed by our factory, but by Tianfeng Technology Company. Here are their product certificates and actual measurements of the size brought with them."

Tianfeng Technology!

Lao Zheng looked shocked and said with emotion: "Their processing strength is so strong!"

Just as Lao Zheng was shocked, a group of people came over not far away, and the scene was very large. Many workers who were working looked at each other. The inspector Lao Zhao also saw it. Seeing the person walking in the front and the middle, Lao Zhao quickly pulled Lao Zheng gently.

………

Today’s eighth update, the eighth update is over. Please give me monthly votes, recommend votes, favorites and other support!!!

…………(To be continued)r580

...
Chapter completed!