In less than 500 meters behind Rekming, a person's face was blocked by thick oil paint, and his whole body was also hidden by a camouflage disguise net that integrates the environment. The sniper lying in a bush was calmly pulling the bolt of the manual SVD sniper rifle in his hand and exiting the shell, and continued to shoot in the direction of Rekming.

The moment when Rekming's butt was next to the ground, he grabbed the gun with one hand and supported the other on the ground. His whole body was like a spring installed under his butt, and his body moved toward the back of the big tree in a twisted posture.

"Two Snipers" The two snipers who were identified by the other party are in this direction

Just now, he hid behind the tree and another bullet flew over the edge of the tree. As long as he slowed down for even 0.1 second, he probably would have to explain it here.

The scalp pain on his scalp made Rekmin calmer instead.

"At the direction of three o'clock" Erkui's voice came from the headset.

Reikeming immediately leaned against the tree trunk to raise the sniper rifle in his hand, bit his lower lip with his upper teeth, and searched in the distance.

In the forest environment, the function of sniper rifles is greatly limited, and there are covers everywhere. However, the fact is that the sniper does not lose his responsibilities because there are too many covers and gives up the opportunity to snipe the opponent.

When he saw the target in the bushes in the distance that was almost integrated with the environment and would miss it if he was not careful, Rekming smiled coldly, stuck out his tongue and felt the wind, and then silently calculated the distance between the two sides in his mind. Finally, he aimed at the target, pulled the trigger heavily, and then continued to set off on the mountain bag without even looking.

A headshot

The war is still going on. However, the gunshots have become much thinner.

"I informed the Soviets that I would do the transaction this afternoon, and I didn't want to wait until tomorrow. I didn't want to wait until dark." After knowing that the gunfire sounds of the special operations battlefields on both sides were getting less and less frequent, Liu Yijiu made such a decision.

The Soviets should also know the situation here.

The Scarlet Rige is not clear at all. The KGB people hope to snipe Liu Yijiu to stop the transaction, and it is even more unclear. The top leaders of the Soviet Communist Party feel a very serious threat to the talent like Liu Yijiu in China. They do not want to see China rise.

The world is only so big that China must not rise, even if they have irreconcilable contradictions with Europe and the United States.

In any case, there were white people in the Soviet Union, while China belonged to the yellow race.

"Exchange" Lie Rige thought about it and nodded after knowing that Liu Yijiu had asked for the transaction in advance.

Special forces should have failed

Immediately, under the protection of security personnel, I headed towards the port on the border between China and the Soviet Union.

Liu Yijiu, Johnson and others also arrived at the border port. This port was once unpassable. In recent years, there has been more secret trade with the Soviet Union, and transactions between the two sides have also become denser.

There were no bridges on the Heilongjiang River, which was not too wide. With the support of engineers from both sides, each built a dock that could accommodate the docking of cargo ships of a considerable tonnage. Both sides each controlled half of the river surface area. When there was no transaction, these docks were filled with movable fortifications.

Liu Yijiu was a little surprised when she saw this situation.

The Fuyuan area has changed a lot from the last time he came here. There was no trade port here, and the Northeast railway network was not connected to the Soviet Siberian Railway in this area. However, it did not expect that under the construction of engineers on both sides, it had become like this.

"Xiao Liu, you can't go over if they are there." Jiang Sen has always been worried about his own safety. Liu Yijiu's safety is very important.

Liu Yijiu shook his head. Without saying anything, he stepped onto his own ferry.

Several security personnel wearing black security uniforms were beside him. These people were much taller than Liu Yijiu. Even if the sniper was outside, they might not be able to find a chance to shoot.

The same is true for the Scarlet Sun grid.

The two ships met above the center of Heilongjiang and then docked together.

"General, what you want is ready, what we want?" Liu Yijiu pointed to the containers covered with thick camouflage nets that had been piled up on the dock behind him.

"Whether you are ready depends on whether you have everything." Lie Rige grinned, but his heart became cold. The plan of the special forces did not seem to be successful. Liu Yijiu seemed to have no idea about this matter, or he didn't say anything at all. "This transaction is really important, so we need to count it first."

"Of course, it's just that, after you count it, how can we be sure that what we want is ready?"

Liu Yijiu is not a fool either.

The troops on the opposite side are clear about the mobilization.

"You are moving the troops against you, you are planning to snatch these things, right?"

"How could our troops be mobilized? It is to implement the agreement between us. Our troops will be withdrawn through the Siberian Railway." Lie Rige was stunned. "This is just the beginning of the transaction. It has lost Japan's five-axis machining center. If you break it up again, we will lose more."

Liu Yijiu did not say anything, Scarlet Rige and his group boarded the Chinese ferry and came to the pier on the Chinese side.

The boxes containing six five-axis machining centers were neatly arranged on the dock, with many fortifications outside, and various high-performance chips for the Soviet Union were also closely guarded in the surrounding area.

The people led by Scarlet Rige began to inspect and count with the assistance of Chinese personnel.

When he learned that the quantity inside was exactly the same as the list, Liu Yijiu was about to ask someone to follow him to check what the Soviet Union was preparing to trade, but Leonid stopped him.

"Liu, although we have cooperated many times, this time the five-axis machining center is different from other processing equipment. Without checking the performance, we cannot ensure that you five-axis CNC machining centers will be what we need." Leonid's words made Lie Rige frown.

He turned to look at the person in charge of the KGB, and the other party didn't have any eye contact with him.

"This is no problem. After all, the five-axis machining center is nothing else and the exchange is for business in Figure 22. What is important is a matter of integrity. The reason why these machining centers do not support wood on the spindle to fix the position is that we are trying to show you performance before the transaction." Liu Yijiu smiled.

The spindle is originally quite heavy, and these boxes can just fit a five-axis machining center. The bumps along the way will definitely have a great impact on the performance of the five-axis machining center.

Neither party to the transaction will honestly give the best things to the opponent.

Under Liu Yijiu's command, the Chinese technicians directly asked the rectangular box on the outer packaging box of the machining center to be disassembled. At the same time, the 98th Division stationed here found generators, voltage regulators, compressed air pumps and other necessary equipment for the machining center, and immediately generated power on the site and connected the machining center inside.

After the power supply is turned on, the technicians enter a series of programs into the operating system. After all the things are done, the sky has begun to dim.

"Strengthen the vigilance around you and don't let their people come in." Li Xiangyang did not appear in the transaction place. Liu Yijiu, Lie Rige, Johnson and others were always on the dock.

The other party is obviously delaying time.

And Liu Yijiu's special forces have not returned yet.

"Chief, you are ready. Is it a trial run?" After completing the preparations, the technician of the operation asked Liu Yijiu.

"Start empty operation" Liu Yijiu looked at the sky around him and nodded.

"Hu" When the technician checked the program and the settings on the machine tool again, he pressed the green start button of the control system. The originally stationary machine tool moved rapidly downwards. At the same time, the workbench was also moving horizontally and vertically, moving quickly. Even if the hydraulic pressure reduces weight, when moving quickly, the slight friction sound of the machine tool guide rail pair and the friction sound of the ball and the screw on the ball screw on the ball screw were clearly transmitted in the deafening generator sound.

When the moving parts of the machine tool move quickly, the sound of "snap, snap, snap" also began in the tool magazine. This is to prepare for a tool change and move the tool ready to be replaced on the spindle to the tool change position.

When the spindle descends to a long distance from the workbench, the spindle stops moving.

At the same time, the tool handle in the tool magazine also began to slowly move downward from the position originally parallel to the workbench until it was parallel to the main axis.

The tool changer robot, which was originally parallel to the y direction of the machine tool spindle, quickly rotated 90° under the driving force of hydraulics. The semicircular jaws on both sides of the robot stopped at the main shaft and the tool library, grabbed the slot of the tool shank, and then suddenly heard a "bang". The robot began to quickly fall down under the hydraulic push, and then reached the position, and rotated 180° again, pulling upwards. The tool handle originally on the main shaft and the tool handle of the tool magazine were exchanged.

"Bang"

With another sound of air pressure, the tool changing robot released, rotated 90° in the reverse direction, and then returned to the original position. The vertical downward shank of the tool magazine also began to slowly rotate until it returned to the position perpendicular to the main axis.

Then the tool magazine began to rotate again

To be continued...
Chapter completed!