Chapter 223 The rules of big factories

Author: half west wind half sand

Chapter 223 The rules of big factories

Now, Lao Wu didn't dare to move in that area of ​​the house. He could only check it first and make sure he knew what was going on before taking action, so as not to destroy the integrity all at once.

That pile of scrap metal is indeed worth some money, but it does not mean it is the optimal solution. Which company does not need cash flow to operate? It is all piled up there, and it cannot be as fast as cash flow.

"I always feel a little pitiful when I look at him!"

"What a pity! If our cash flow is cut off now, we can't get money from him, and Brother Donglai can't pay us wages, who do you feel pity for?"

Patting the carriage, the truck started to move slowly. He reached out and closed the door of Yu Wei's company slowly. Ding Aixing rolled his eyes at He Xiaolong.

"It seems so. What you said makes sense. Those who don't pay deserve it!"

The effect of swapping places is immediate. He Xiaolong doesn't sympathize with Yu Wei at all, he even hates him, secretly thinking that you deserve it.

Ji Donglai directly handed over the installation of the hot-dip galvanizing production line to the technical department, and handed over the electrical line to Ji Ping. Ji Donglai went to the power plant to settle the balance for the maintenance of the reactor.

According to the project requirements, it must be operated safely for more than two months before the other party can consider it as acceptance. This project has been running for more than three months now, and Ji Donglai can finally receive the project payment.

"Mr. Ji, we still have some projects here. Let Xiaotian show you around later. If you can do it, you can take it. After all, we still recognize the quality of your projects! This project was done well last time. I wish you the best in the future.

We have a happy cooperation!”

After the boss of the other party signed the project settlement form, he said this to Ji Dong. Ji Donglai quickly thanked him and turned back to the finance department to find Mr. Tian.

"This project is not difficult. The main problem is that you have to do hot-dip galvanizing after welding. Our last supplier had some flaws when doing this, and the welds cracked later. Look at this photo!"

Mr. Tian didn't have any unnecessary words. Ji Donglai did a good job on this project, and he was well regarded by the boss. The key is that Ji Donglai is more sensible here and invites him out for tea and chat when he has nothing to do.

Ji Donglai took a few glances at the project fault sheet and couldn't help but frown.

It can be seen that the other party's welding seam should be oxygen dioxide welding, and the joint surface is relatively good, but I don't know why it cracked. It is most likely that the welding rod failed.

Ji Donglai followed Mr. Tian to the scene again, and the result surprised Ji Donglai.

"This pillar is also cracked, hiss..."

Ji Donglai randomly inspected the welding seam of a pillar, and immediately found that the welding seam was cracked, and Mr. Tian's head suddenly became bigger.

Problems have arisen one after another with the columns constructed by the other party. This is no longer a trivial matter. According to the factory's judgment standards, it is likely that the material selection or design is unreasonable.

The next step will definitely be to hold a quality analysis meeting. If it really comes up, he will have to follow suit. Mr. Tian keeps greeting the ancestors of the previous construction company in his heart.

"This is troublesome. If it's just one pillar, we can just replace it! Now it's gradually cracking. I found two pillars, and you found them again today. Those are always like this if you don't fix them!"

"We will never allow this to happen here. Mr. Ji, you have to wait until you receive the project funds. You have to master this. Otherwise, if you really let the leaders find out, someone might be thrown into disgrace!"

"

As he spoke, Mr. Tian started making phone calls, calling a lot of leaders from various safety departments, from quality to production, and then to on-site construction supervision.

These leaders then called people here to search for various records.

Facts have proved that a big factory is a big factory. In a short time, we found all the information on the quality supervision of the year, the construction party's material report, the construction qualifications, including the welding rods.

Immediately afterwards came the accident analysis meeting, where the person in charge of the entire power plant began to analyze and then report it step by step.

Ji Donglai only read the beginning, and the rest of the time was to go back and wait for the settlement of the project funds. Zhao Shuying followed. The other party was the busiest these days, taking stock of the various assets recovered and then recording them in the account.

In order to carry out the work reasonably, Zhao Shuying, with Ji Donglai's consent, recruited several warehouse managers. They were all local women. They could read and understand records. They would do inspections with Sun Li when they had nothing to do.

"Donglai, his welding is probably due to the wrong welding rod and incomplete hydrogen removal! This is a slow cracking, and it is outdoors, which is inevitable! And I estimate that his galvanizing is not hot-dip galvanizing, but early electroplating. Hurry!

But brittleness cannot be avoided. If there are more problems during the steel forming process, the problem will be even bigger!"

"Now we use new processes, especially hot-dip galvanizing. Boil the welding joint in a zinc pot at 470 degrees for a period of time. This not only removes hydrogen, but also slowly releases the stress on the welding joint. Basically, this can be avoided.

Such a situation!"

"In addition, part of the hydrogen can be removed during pickling. This company should be pursuing speed one-sidedly when working, without considering the subsequent hydrogen removal step. This is not advisable! Fortunately, these workpieces are supported. If they are beams

Something big is going to happen!"

Everyone in the technical department of Ji Donglai Company is discussing the possible reasons for the fracture of the power plant column welding joint. In the power plant courtyard, four transport trucks are slowly passing through a certain area.

There happened to be a speed limit belt, and the truck made a clanging sound when it passed the speed bump, with three galvanized beams on its head dragging six 500-thick pipes.

As a Roots pump began to roar, the fluid in the pipeline passed through at high speed, and the pipeline began to vibrate slightly. The cracks in the welding joints on the beam began to crack at a speed visible to the naked eye.

"Bang!"

Another car passed the speed bump, and the thing being pulled on the car made a huge roar due to the bumps. Finally, one of the beams on the car couldn't hold it back, and the entire welding joint broke.

"Bang!"

The front wheel of the third car had just passed the speed bump, the cab appeared under the beam, and the entire beam hit the cab heavily.

"Boom!"

"Wow!"

"Ah... my mother!"

"Bang!"

As the beam hit the cab heavily, the windshield shattered, and then the vehicle's airbag burst. The driver was pushed backwards, his neck got stuck on the sharp iron plate, and half of his head fell off.

Ji Donglai and a group of people discussed it for more than two hours. When the phone rang urgently, Ji Donglai looked at Mr. Tian's call and hurriedly answered it.

"Mr. Tian..."

"Mr. Ji, listen to me and don't interrupt! I want you to say a good word. If there are any problems with the project you are doing, report it to us immediately! Someone died in the factory just now. A major quality and safety inspection will be carried out soon. First of all, ask

What you are doing is self-inspection of your project. If you have problems and fail to report them, if we find out, it will not be a trivial matter like your self-inspection!"
Chapter completed!