Qin Feng will never admit defeat!

This is all reborn, but in the end, it is still impossible to overcome the engine technology, and you have to admit defeat early. This is not the attitude that a reborn person should have.

If you want to admit defeat, wouldn’t it mean that China cannot have its own advanced engine? That’s too frustrating!

Qin Feng doesn't accept it!

"We must develop our own engine! We must!" Qin Feng said with a persistent look on his face.

Wang Shufu and the other two were also moved when they looked at Qin Feng's persistent expression, but they had to deny Qin Feng's unrealistic idea.

Engine, that's an engine! It's not something you can develop casually.

"Dr. Qin, I have a rumor that I heard when I was studying. It may not be accurate, or it may be some exaggeration, but you can refer to it and then consider whether to build an independent engine!" Wang Shufu said.

Qin Feng nodded and listened with scruples.

"This is a rumor that our professor said when I was studying for a master's degree at the Beijing Nonferrous Metals Research Institute. I don't know if it is true. I will just say it, so you can listen to it!" Wang Shufu reminded again.

"Tell me! I'll listen!" Qin Feng said.

"In China, engines have always been our fighter jet bottleneck and have always plagued the growth of our air force." Wang Shufu said.

Qin Feng nodded. This is a cruel reality, not only that, but also in the future. The engines of fighter jets have always been very backward.

"At present, the large duct turbo engine is the mainstream development direction. There are only two countries that can develop this type of engine at present. "When our country has been introducing fighter engines from the former Soviet Union because of its international relations in the past. However, the relationship between the former Soviet Union and us is not very friendly. In the past few years, the former Soviet Union also collapsed and Russia came to power. Russia is a capitalist country, and its country is very chaotic."

Qin Feng nodded. Now Yeltsin is in power, and in a few years, he has entered the era of Putin.

"So, the country has a two trillion plan!" Wang Shufu said.

2 trillion! Qin Feng took a breath. This is not a few billion, tens of billions, but 2 trillion!

Not to mention the present, even if it is put into the future, it is not a small number.

"Of course, it's not that we're going to take out 2 trillion yuan now. The country doesn't have that much money now. Instead, it's that the country is willing to spend 2 trillion yuan to develop fighter engines!" Wang Shufu explained.

Qin Feng nodded. That's right. If you take out 2 trillion now, it would be scary. Then domestic prices will be guaranteed to soar immediately.

"My policy is to introduce Russia's D-30 turbofan engine to meet the normal use of active transport aircraft, and to establish a development path with my country's characteristics. I hope to develop a turbofan engine comparable to the D-30. However, it is difficult to do it. This is not just about having money." Wang Shufu looked helpless.

Qin Feng scratched his forehead. Isn’t this money enough to make money?

Two trillion!

"Well, Qin Feng, you are still young and have not studied science, so you may not be very clear about this aspect!" Li Chuanfu said, "Let me give you a simple example. For example, our CNC milling machine that was just imported, which was made in Japan, can be regarded as the most advanced one now. Of course, it is not the top one."

Li Chuanfu pointed to a CNC milling machine in the distance, looking amazed.

"This is a CNC milling machine produced by Mazak Yamazaki, Japan. Its accuracy is, Qin Feng, I don't know how you got it, because this precision CNC milling machine is exceeding the standard!" Li Chuanfu said, "This is a precision level CNC milling machine that is simply impossible to allow exports!"

"It can be said that this CNC milling machine is a treasure in any domestic heavy industry enterprise. Although this is nothing in the West, and it is not even the top-notch, in China, it is at least 30 years ahead of the current major domestic enterprises." Wei Jianjun said with a baby look.

"And all the equipment here is like this. They are at least 30 years ahead of those domestic equipment!" Wang Shufu smiled bitterly, "It's so terrible. We don't care about how you get it. But these are indeed our treasures. But this is nothing in the world! Do you understand now?"

What do you understand? Qin Feng is a little confused.

Seeing that Qin Feng was still a little confused, the three of them had to continue to explain.

"Engines are the most cutting-edge technology. It can be said that if you ask Toyota and Mitsubishi to give us the drawings of their best engines, we can't make them. Don't think we're exaggerating. This is the fact. Even if we put all the drawings in front of us, we can't make them now!" Wang Shufu said helplessly.

"This is definitely not something that can be done without core technology!" Li Chuanfu said, "For example: The MIT Institute of Technology in the United States successfully developed the world's first CNC milling machine in 1952. After that, Germany and Japan took the front foot and stepped on their back foot, and my country's first CNC machine tool was successfully developed by Tsinghua University in 1958. The gap is only 6 years, not too big. Look at the current situation, any ordinary worker goes to Japan for a few years to train, or works in a German company for a few years, and the technology can crush old colleagues of the mainland who were originally of the same level when they come back. This is the current gap."

"It's a terrible gap! What we lack is not only core technology, but also workers who master technology. At the same time, in the processing and manufacturing industry, we also owe too much money." Wei Jianjun said, "How many famous equipment manufacturers in China can you say?"

Qin Feng can't answer this.

I have never been a science man.

"Shenyang Machine Tool, Kunming Machine Tool, etc., have no more than 10 machine tool factories with leading domestic technology, and they are all state-owned enterprises. And they produce the best lathes, which is 30 years behind our CNC milling machine from Mazak Yamazaki, Japan!" Wang Shufu answered.

"And Japan, you see such a small country, the relevant equipment production companies they own are famous around the world: Yamazaki Mazak, Atoda, Okuma, Mori Seike, Jetakot, Matsuno, Komatsu, Aoda, Mitsubishi, Sadick, Citizen, Fuji, Toshiba, Brothers, Tsukizawa, Takizawa, Toshiba, Okamoto, Midori, Hokos, Sumita, Ruo Nakamura, Mitsui Seike, Toyoka, Fuji, Matsuura, Takamatsu, Hamai, Kuraki, Suntech, Andada, Kujima, Sumitomo Heavy Machinery, Fentet, Fanako, Ikebe and other hundreds of companies. These are familiar to me, and there are some brands that I don't know but still have global competitiveness." Wei Jianjun said.

Wei Jianjun has built a factory and has a very deep understanding of equipment.

In the processing industry, the gap between China and Japan is too big. What is the reason?
Chapter completed!