The first day of Xinghai Group’s exhibition was reported by many media.

On the second day of the exhibition, a media report aroused widespread attention and heated discussion among netizens.

[The end of one era, the beginning of another]

Just looking at the title, you can't tell much.

This is how it was reported:

[Perhaps many Chinese people have seen the construction machinery of Sanyi and Xu Gong, but they have also seen "CAT" printed on many construction machinery, which is Caterpillar.

Caterpillar, with revenue of US$50 billion last year, ranks first among global construction machinery manufacturers, the world's largest manufacturer of construction machinery and mining equipment, one of the largest manufacturers of gas engines and industrial gas turbines, and the world's largest manufacturer of gas engines and industrial gas turbines.

One of the largest diesel engine manufacturers.

Although Caterpillar is the sales king in the field of construction machinery, it cannot be called the king of construction machinery, let alone the king of the machinery field.

Because construction machinery is only a major category of machinery. Caterpillar does not produce CNC machine tools or develop materials. It can only be said to be the overlord of construction machinery.]

Many netizens saw the analysis in this report, and some insiders recognized it.

Some netizens said that the core of engineering machinery, such as oil drilling equipment, is still three-cylinder hydraulic pumps (mud pumps) and diesel engines. Most diesel engines use Caterpillar steel structures such as derricks and platforms. There is no core technology, and the materials are mostly

Common Q235B and Q345B are used, and Q345D and Q345E tough materials are used in low temperature environments. The welding method is secondary welding, which mainly controls the welding deformation. Compared with machine tool manufacturing, it is not that high.

Port machinery and ships are actually not much different from the manufacturing of drilling equipment.

Like an excavator, the core is still a diesel engine. In terms of machinery, it may be a hydraulic cylinder. The power arm material uses higher strength materials Q490 or even Q690 and above, which requires higher welding requirements.

For welding, welding deformation is always the first problem in welding, but as long as the workpiece allows simmering or other methods to correct the welding deformation, the difficulty of welding will be reduced a lot.

For the above construction machinery, welding accounts for the main operation and is also the most critical process. If Xinghai Group is allowed to manufacture it, except that the engine cannot be manufactured temporarily, other problems will not be a big problem. Some big guys require larger factories and experimental sites.

For ordinary people, the above construction machinery is difficult to operate, and the entry threshold is relatively high, because the equipment is relatively large, requires a large site, and requires an investment of over 100 million.

It’s not that Mu Yang is not interested in construction machinery, but he feels that the secondary value per unit weight is not high, that is, the profit per unit weight is not high, and the technological content is not high. In addition, there are already Sanyi, Xu Gong, and Honghua in the oil drilling category in China.

, Liangji, Gemstone and other manufacturers, there are many crane manufacturers, there are hundreds of them in Xinshi and Yiyuan County, Henan Province. Compared with oil drilling equipment, cranes have less technical content and have lower entry barriers.

However, the meaning of this article seems to be an ambush, causing readers to wonder: Who is the king of the mechanical field?

Could it be Xinghai Group?

Why?

This article goes on to analyze:

[In terms of revenue, General Motors is higher than Caterpillar, with annual revenue exceeding $100 billion.

In terms of precision technology, Yamazaki Mazak is the world leader in machine tools, but its revenue is only a few billion dollars, so it cannot be called the king of machinery.

In the 20th century, ThyssenKrupp could be called the king of machinery.

The more famous Krupp cannon, Tiger tank, and the world's largest excavator weigh 45,000 tons and are 215 meters long.

Its business scope includes steel plants, shipbuilding, complete sets of equipment, bridge construction, chemicals, textiles, plastics, water treatment, oil refining and nuclear reactors. In that era, it should be said that in the mid-to-late 19th century and the 20th century, it could be called the king of machinery.

Thyssenkrupp is still outstanding in the 21st century, with revenue of more than 30 billion euros last year, but its dominance is indeed not as good as that era.

Xinghai Group is expected to become the new mechanical king, or in other words, it is already one.】

The editor's analysis is pretty good, and it is indeed true.

I’m just saying, can Xinghai Group really become the king of machines?

[In terms of materials, the technology of aluminum alloy automobile plates, titanium alloys, and special steels has formed a single model dominance, but the volume is not large enough and there are not many models;

In terms of cars, it already has the top-notch future car series and the best-selling Hummer EV, and has independently developed motors and vehicle-machine systems. It can be said to be the king of new energy vehicles, dominating the upstream and downstream;

In terms of welding machines, secondary welding machines, argon arc welding machines, plasma welding, laser welding and robot arc welding, they have become the dominant players in this field;

In terms of software, Xinghai Group's machine-machine systems, AD software, XH-CAD software, CNC systems, etc., are all top-notch in the industry.

Others, such as semiconductor refrigeration chips, bulletproof glass, etc., seem to be nothing.

Until the advent of metal 3D additive equipment, metal processing methods have been revolutionized, breaking the situation where traditional metal 3D finished products cannot reach the level of forgings.

Perhaps, some people think that Xinghai Group does not have any superior products in CNC machine tools, and metal 3D cannot completely replace CNC machine tools, and it also has certain limitations.

This kind of doubt is still reasonable.

Until now, Xinghai Group has independently developed five-axis linkage CNC machine tools to make up for its own shortcomings.

So, metal 3D additive equipment + five-axis linkage CNC machine tools = the overlord in the field of metal processing!

It can be said that there is no metal processing product that Xinghai Group cannot process.

Xinghai Group has the world's top technology in multiple machinery fields, and even dominates the market. When it solves the problems of materials and mechanical processing, it also solves software problems. In the field of machinery, including engineering machinery, medical machinery, chemical machinery, etc.

Wait, nothing can stop Xinghai Group, unless Xinghai Group doesn't want to do it.

Xinghai Group's international exhibition also declares to the world: I am the king of machinery in the world!

Perhaps, in the near future, Xinghai Group will become the king of industry.

Xinghai Group’s black technology appears frequently, perhaps, a magnificent era is coming!】

This report analyzes the market situation of Xinghai Group.

It aroused heated discussions among netizens and was widely reproduced by many media.

Let the world get to know Xinghai Group again. Is it really the king of machines in the world?

According to the analysis of this report, Xinghai Group does have this strength, but it has risen too fast, and everyone has ignored its global influence, and few people think in this direction.

But when it is compared with overlords in various machinery fields such as ThyssenKrupp, General Motors, Yamazaki Mazak, Caterpillar, etc., it seems that these former industry overlords have been surpassed by Xinghai Group.

There is another report, which is different from the analysis of the previous report. It is that media reporters photographed the visitors. Among these visitors, there are many high-level executives in the mechanical field, such as the president of Yamazaki Mazak, four-star companies and other well-known companies.

Corporate executives.

Engineering academicians from various universities and relevant leaders from the mechanical department also came to visit and inspect.

This shows that these people attach great importance to this exhibition of Xinghai Group. If they do not attach importance to it, they will definitely not participate. Moreover, on the second day of the exhibition, due to the large number of visitors, Xinghai Group had to collect tickets to limit the flow of people and at the same time, the exhibition

The time was changed from three days to five days.

At this exhibition, Xinghai Group earned a lot of attention. At the same time, it obtained partners who participated in the exhibition, and the products they exhibited also attracted widespread attention.

The third day of the exhibition.

In the exhibition area, Zhang Xiaofeng, vice president of Xinghai Group, accompanied Zhang Weishi, director of H City, Zhang Lan, leader of the machinery department, and others to visit.

After turning around in a circle, I observed the workpiece being processed in front of the five-axis CNC machining center. Hundreds of spectators gathered around the equipment.

Zhang Lan saw so many people watching around him, of which foreigners accounted for a quarter, and praised: "This is the five-axis linkage CNC machining center of Xinghai Group. I heard that it can realize intelligent manufacturing."

Song Cheng saw the leader arriving and came over to help introduce him: "Our chairman has said that it is at most half-intelligent manufacturing level."

Zhang Wei praised: "Mr. Mu's requirements are too high, his vision is just different."

Zhang Lan, the leader of the machinery department, nodded frequently: "I made a big thing without saying a word, which scared my foreign colleagues so much that they couldn't sleep. They quickly booked air tickets to come and watch."

Zhang Wei said: "Photography and filming are not allowed on site. You can only watch it on site. In addition, this is indeed an important weapon of the country, so it should be like this."

"Most of them are customized. Currently, there are orders for more than a dozen or more than 20 units. There are no exports." Song Cheng said with a smile.

"Awesome, this order volume is quite large," Zhang Wei praised.

Zhang Lan said: "Revenue is not the focus, the key is its role. It has helped us solve many key problems. We will no longer be afraid of being stuck by foreigners in the future."

"Yes, the leader is right." Others said.

"I haven't seen Mr. Mu in the past two days." Zhang Wei asked curiously.

Zhang Xiaofeng said: "Our chairman has been busy recently and has indeed not come here."

Zhang Wei nodded, feeling very impressed: "Then let's not disturb him. I heard that since he stepped down as president, he has been a busy man in scientific research, immersed in the laboratory all day long."

After viewing the five-axis CNC machine tools, everyone came to the exhibition area for metal 3D additive products. Hundreds of products were displayed on site, with disassembled parts so that the internal structure could be seen clearly.

"The surface of this workpiece has reached a mirror surface and the roughness is very low. Is there no secondary processing?" Zhang Lan asked. Zhang Xiaofeng was not familiar with this and asked the on-site staff to help explain.

"All the exhibits on site are directly formed in one go without secondary processing." the staff explained.

"This is so powerful, it can even be said to be more powerful than the five-axis linkage CNC machine tool just now. Except for intelligent manufacturing, Mazak is estimated to be only a little bit behind Xinghai Group. But for metal 3D additive equipment, only Xinghai Group can achieve this

The level of forging is two or three levels higher than that of its peers, at least ten years advanced. Of course, it may not be able to reach the level of forgings in ten years. Some technologies are difficult to innovate and may stay for decades." Zhang Lan praised.

.

“The leader is really knowledgeable.”

"I have only visited a lot of 3D printing equipment manufacturers to understand it, but when it comes to professionalism, I am a layman, and you are the experts."

The staff explained: "The leader gave me the award, but I don't understand. The project team members did not come to the exhibition. The company does not allow exposure, and they are very busy."

Zhang Lan said "Oh", slightly embarrassed, and then smiled: "No, the talents in your company are very powerful."

…

Mu Yang really didn't know the situation of the exhibition. He was busy with scientific research and only sent two students to practice. Zhou Chen was in charge of the exhibition.

On the afternoon of the third day of the exhibition, Mu Yang was busy when he suddenly received a call from the Imperial Capital. The phone number was very special. It was the landline number of a super boss.

"Mr. Mu, why didn't you notify me when you made such a big move?"

"Boss, you all know this. Didn't I want to tell you later? We have just made the wafers for half a year, and the EBL lithography machine samples are still far away."

"What are you talking about? Wafer? Photolithography machine?"

The boss on the other end of the phone was very shocked.

"Uh, leader, isn't that what you're asking about?" Mu Yang thought that the big boss could detect most of Xinghai Group's secrets, including Xinghai Group's wafer progress and lithography machines.

But thinking about it, he seems to have made a mistake.

He has tested the loyalty of employees in the wafer and lithography machine project teams, and has excluded those with a loyalty lower than 70. Even the higher-ups may not be able to know.

As soon as he became busy, he was distracted and didn't think so much at all.

After he mentioned the lithography machine and the wafer, he realized that he seemed to have said the wrong thing.

"Wait a minute, I'm asking about the five-axis CNC machining center. Didn't you hold an exhibition?"

Mu Yang was slightly embarrassed: "Five-axis linkage CNC machining center? Oh, I don't care about this. President Zhou Chen is in charge. I didn't pay attention to the exhibition or go to see it. I'm busy with other things recently."

"Then let's talk about wafers and lithography machines first. Did I hear you right? You are developing this and have achieved results? How about it?"

"The wafers are okay. They have been in mass production for more than half a year. The prototype of the photolithography machine will be ready by the end of the year."

"The wafers have been in mass production for more than half a year. Why is there no news about this in the market? If I hadn't asked, I probably wouldn't have known that Xinghai Group had developed the wafers."

"We are not selling wafers. Let's hoard them for our own use. Anyway, we don't have to worry about selling them."

"What about the lithography machine? What's going on? It's not an EUV lithography machine? I still know a little bit about this thing."

"Hey, boss, it's a long story."

"It's okay. I'm free today. You can tell me slowly." The boss asked his secretary to quickly make him a pot of hot tea.

An hour later, the boss was still listening with interest.

"Mr. Mu, I'll go visit it again in a while. Just to hear what you say, it's better to see it live. This is a big deal."

"Okay, you're very welcome." Mu Yang also wanted to talk to the boss. There is a big thing that requires the boss's help.

It would probably not be easy without the help of a big boss.
Chapter completed!