The "mycelial bonding monster" covers the entire body of the "ghost shell" obviously comes from the mirror image of the transformed armor form of the female warriors. These mycelial bodies that can be separated and combined at will all come from the powerful ability of "MOE microelectronics" that "mycelial cells". This is also the reason why the "MOE microelectronics" are seen through by the knowledgeable Wu Chen at a glance, which is the "high concept" of the fragments of time and space in this plot.

Looking at this strong and huge new body, the faceless mask rushed towards the rumbling "Doom Fortress-279" that was rumbled and squirted out a powerful beam of electrons!

Electron-beam is an electron-collection beam that has a high energy density. It uses the electrons generated by the cathode in the electron gun to be accelerated to a very high speed (0.3-0.7 times the speed of light) under the action of the high voltage (25-300kV) acceleration electric field between the cathode and the anode. After convergence through the lens, a dense high-speed electron flow is formed.

This is a simple principle for the laboratory to manufacture electron beams, and the one ejected by the masked giant is actually a torrent of countless "MOE micro-electrical appliances".

As long as the "MOE microelectronic appliances" that attempt to enable "long-distance electronic transmission" pass through the thick alloy shell covered by the "3D nanocomposite armor", the "Doom Fortress-279" will completely fall. Like the previous adventure team, it will be infected with mold and eaten and wiped away by the mycelium.

However, another unexpected thing for the Mask Giant was that the "electromagnetic (deflection) shield" perfectly blocked his energy jet.

It can be seen from the naked eye that the strong electron beam seemed to hit an invisible air wall, scattering into a radiant electric light and disappearing into the air.

"Ah..." The masked giant sighed and closed his hideous mouthpart: "It seems that we must first break the strange light emitter (electromagnetic generator) on our back."

"Reactor No. 2 overload protection!" Valkyrie, who received the bullet frame alarm in the "passenger cabin", immediately switched the energy core of the "electromagnetic shield": "Reactor No. 3 is online."

Previously, Wu Chen transformed the 10 "scalpels" divided nuclear warheads he obtained into 10 energy cores of "Doom Fortress-279". It is to prevent the situation in front of him from happening.

The drooping light gauge stood up again, and the masked giant asked curiously: "Speaking of it, can your familiar chariot also deform?"

"Of course." With the help of the database that comes with the multi-function watch, Wu Chen slightly transformed the "hexagonal tooth deformation technology line" into a lower version of "mecha transformation", which is not easy to get.

"Why not?" The masked giant imitated Wu Chen's tone.

"Sir." Valkyrie was eager to try.

"As he wished, activate the 'fighting mecha' form!" Wu Chen ordered.

"Affect the order." Valkyrie acted immediately.

The electromagnetic shield suddenly expanded outward into an energy cover visible to the naked eye. The "Doom Fortress-279" lying on the ground suddenly stood upright and transformed into a heavy two-legged combat mecha.

"MMC operating system link, synchronization rate is 15%, 30%, 50%...100% sync. Sisters, we're going to do it!" Valkyrie said the battle slogan of the mothers.

The "MMC" mentioned by Valkyrie is the abbreviation of "Mechanical Motion-capture".

Motion-capture, referred to as Mocapture (Mocap), also known as motion capture. It originally refers to the technology that records and processes the movements of humans or other objects. It is widely used in many fields such as military, entertainment, sports, medical applications, computer vision and robotics.

3D motion capture technology can quickly record the movements and movement trajectories of human bodies and objects, perform delay analysis or multiple replays. Through the captured information, the spatial position of human bodies and objects can be simply generated at a certain moment; if complex, any subtle deformation of the face or trunk muscles can be calculated, and then the real movements of the human body are intuitively matched to the designed action role. It can accurately present the six degrees of freedom information such as spatial position, velocity, acceleration, angle, angular velocity, and angular acceleration of the person or object.

The history of mechanical motion capture is also far earlier than people think.

The first mechanical operating arm was born in 1950, mainly to replace humans in relatively dangerous environments. In 1960, Disney adopted a mechanical action design system. In 1963, robots were born, which could respond to feedback, which was very similar to modern mechanical motion capture technology. It controls the motion of the equipment through human movements and then gives back relevant equipment motion information. In 1983, Professor Calvert used a partial pressure gauge as an angle sensor for human body analysis. In 1983, Raniere invented the mechanical data glove (Cyber-Grasp). In 1985, with mechanical motion capture as the main technical core, the VPL Research Center developed virtual reality technology.

The initial mechanical motion capture relies on mechanical devices to track and measure motion. A typical system consists of multiple joints and rigid connecting rods. An angle sensor is installed in the rotatable joint, which can measure the change in the rotation angle of the joint. When the device moves, the movement trajectory of the capture point in the space can be obtained based on the data of the angle sensor and the length of the connecting rod. The rigid connecting rod can also be replaced with a variable length telescopic rod, and the change in its length is measured with a displacement sensor. One application form of mechanical motion capture is to connect the moving object to be captured with a mechanical structure, and the object is transported.

The movement drives the movement of the mechanical device, so it is recorded by the sensor. Another form is to use joints and connecting rods with angle sensors to form a "digital model of adjustable posture". The shape can simulate the human body or other animals and objects. The user adjusts the posture of the model according to the needs of the plot, and then locks it. The rotation of the joint is recorded by the angle sensor, and the modular posture is calculated based on these angles and the mechanical dimensions of the model. However, this technology is difficult to use in real-time capture of continuous movements, so it is mainly used for static modeling capture and keyframe determination.

This chapter is not finished yet, please click on the next page to continue reading the exciting content later! Modern mechanical motion capture technology does not have to adjust the posture of the model anymore. Just use an exoskeleton system to fix the angle sensor on the motion capture collector to collect the human body's movement data. The advantages are low cost, simple calibration of the device, and high accuracy. Real-time data capture can be easily achieved. It is mainly because the mechanical equipment has dimensions and weight problems, which is very inconvenient to use. The mechanical structure hinders the performer's movements and limits it to the fact that many intense movements cannot be completed.

Of course, with the birth of kinetic energy armor, mechanical motion capture was completely eradicated due to the constraints of mechanical equipment.

Simply put, the kinetic armor of the transformed motorcycle of Valkyrie and the 6 beautiful female warriors is the exoskeleton system that captures mechanical motion.

The control mode of "MMC" is between "The No. 1 Player" VR glasses + treadmill entering the Oasis virtual world, and the two control modes in "The Rim of the Peace" that controls the giant mecha with multiple people's driving.

Not too backward nor too ahead of the curve.

For the "Doom Fortress-279" in front of you, the technology is just right.

It is also controlled by two operators in the Pacific Rim, one manipulating the movement and attack of the mecha, and the other manipulating the energy system and weapon system of the mecha; they establish connections with the mecha through neural connections, and command the various actions of the mecha through physical movements and thoughts.

Valkyrie + 6 beautiful female warriors, a 7-person "MMC control team". The man-machine is integrated into one, and the brains are connected to each other when controlling the "Doom Fortress-279" heavy two-legged combat mecha, sharing memories and consciousness together to achieve a perfect synchronization rate between humans and mechas.

The "Doom Fortress-279" in the form of heavy-duty two-legged combat mecha exudes a pure artificial mechanical beauty all over the body. It looks simple and practical, with clear edges and corners. It has no advanced mechanical life form of Transformers at all.

But the whole body was filled with a dangerous aura that made the masked giant afraid.

The heavy mechanical foot of the anti-joint squats down slightly to accumulate force, boosting the vector nozzle, the rocket engine ignites violently, and the mecha giant punches out!
Chapter completed!