In the workshop nine.

A not-so-large machine covers an area of ​​only six square meters. In terms of machining centers, this is miniature.

Just this machine has 40 tables, eight drawing tables, four metal workbenches, sixteen sofas, eight sofas, and fifty camp beds.

Li Sanpao stood in the middle with his hands crossed his chest.

Then there are Feng Yuchun, professor of mechanical and electrical engineering at Jingzhao Jiaotong University, Lin Heming, professor of electrical and optical science at Xijun, Qiao Lizhi, professor of computer science at Jingzhao Jiaotong University, and Wu Qianye, professor of mechanical theory at the University of Technology. There is also He Qiufeng from Jingzhao Jiaotong University, a professor of materials science. He was not here tonight because he was going to the school laboratory to verify several sets of data.

Going further out, Zhang Jianguo's apprentice Wang Xiaoxiong, Zhang Jianguo's third junior brother Meng Hao, and Feng Yuchun's doctoral student...

There are three circles inside and three circles outside, and there are already people standing here.

In front of the workbench, Li Dong, also known as Li Sanpao's second apprentice, is forty years old this year, older than Zhang Jianguo, but he studied with Li Sanpao two years later than Zhang Jianguo.

A level 8-level turning worker, a senior technician in a power plant, and is also a treasure of a power plant.

Zhao Fang kept running around with a record book. He is now Li Dong's apprentice.

After completing all the tests and equipment inspections, Li Dong was already sweating profusely.

"Master, I'm ready."

Li Sanpao turned around and said, "Professor Wu, Professor Qiao."

"Yeah." Wu Qianye waved his hand gently: "Each group starts recording and test the machine for the seventh time."

The doctoral students sat at the desk and began to get nervous. There were TVs in front of them. These TVs acted as monitors and sent various data to the TV screen. Because there was only one computer, it could be said that the world's top-notch home-level, with a unit price of nearly several thousand US dollars.

The machine started to move.

This time the task is to carve a relief of a horse on a square aluminum ingot at one time.

All the processing processes were carefully thought by Li Sanpao, and Professor Qiao's students typed one letter at a time. At present, this machining center is different from Bai Hao's original design, and it was developed by Professor Lin and his students on Bai Hao's design drawings.

At present, all the feeding data are four digits after the decimal point, which is a few degrees of one thousandth of a millimeter.

This is a grating ruler that Lin Heming and his students rushed to work.

Too difficult.

The entire workshop of the Ninth Branch Factory is full of panda eyes. Even if you are asked to sleep, no one can lie on the bed with peace of mind. This is why Bai Hao hasn't seen anyone for a few days, and his clothes are no longer shining, so he started to wear a cotton coat.

I was so sleepy that I leaned on the sofa and slept for a while, and when I woke up, I joined the work.

Lu Dacai, who followed Bai Hao in, stared at him for only a minute, suddenly took a few steps forward, knelt on the ground, and tears poured out like spring water.

Four-axis, this is the four-axis machining center.

The Xia Kingdom wanted to own equipment but did not have it at all. Lu Dacai visited the Japanese island, the beautiful country, and the bunker country, but these countries reached an alliance and would not sell such high-end equipment to the Xia Kingdom. Even if they visited, they would only take a look outside the glass window.

Bai Hao knew that this four-axis had already been completed.

But Li Sanpao and the four professors wanted more data and research materials. Their purpose was to thoroughly study this technology and turn the four-axis into a mass-produced machining center.

Seeing that the relief horse was completed, when Li Dong stepped forward to measure the error value, Bai Hao walked to Li Sanpao: "Master Li, there is such a thing. Listen to me, I suspect that the little Wozi has cheated us."

"Uncle Dacai, let's talk about it."

As soon as Lu Dacai touched his face, he ran over a few steps: "Can I get closer and take a look?"

"Let's talk about something more important. You helped the power plant to check the Japanese equipment. I personally suspect it was an assembly problem. You have seen it with your own eyes and talk about it."

Li Sanpao turned around and looked at Lu Dacai seriously.

Lu Dacai adjusted his mood: "I didn't dismantle it, but I just observed the machine at close range. I can't say it. I only talk about one of the problems I found. There are several locations that early installation may have damaged the bearing insulation. Technically, if the insulation is damaged, then the very thin bearing oil film will be broken down by the shaft voltage. After the oil film breaks down, there are many results, you understand."

Lu Dacai is not good at speaking, but what he says is the key point.

There are real experts here.

After Wu Qianye's analysis, "Yes, oil film breakdown not only causes the rolling element lubrication conditions, but also the electric sparks that may also cause electrocorrosion to the bearing rolling element, causing the rolling element surface not only to shine and accelerate the bearing wear."

Lu Dacai continued: "Because we came to Qinzhou not to take care of this, and there were no instructions above, it was difficult for me to check other damaged parts, but I estimate that the losses caused by various bearing problems alone will cost millions of US dollars."

Suddenly, Lu Dacai turned his head and looked at the four-axis machining center. His lack of words does not mean that he is stupid.

In an instant, he understood why Bai Hao took him into the workshop.

"With this, we can produce the circular curve reducer by ourselves. And we can make hundreds of them in a day. This machine can do it, but it will definitely do it."

"Of course." Wu Qianye knew the capabilities of this machine very well, and knew that the things to be processed were impossible to complete by ordinary machine tools, but the four-axis can be easily completed. The program is required, and hundreds of them can be processed a day. The next thing is the material problem, with He Qiufeng there, he can withstand it.

Bai Hao reached out to Lu Dacai's shoulder: "I said Comrade Dacai, tomorrow you will definitely have the chance to enter the workshop with the door blocked, and you will steal two bearings with reducer function out. No problem."

"this."

Seeing Lu Dacai hesitating, Bai Hao said again: "Store it out, I'll find someone to help you. You just need to get it to the door of the workshop."

Lu Dacai didn't understand: "Why don't you explain directly to the factory? I think the factory should support you."

Bai Hao shook his head: "I want to make sure if I can do it first. If I can, I won't come forward. How did they ask me, Mr. Li, to force me to retire, and today I will invite Mr. Li back. Although there was no way in the factory back then, if you don't speak out, you will be so suffocated."

"Yeah, okay." Lu Dacai agreed.

Bai Hao straightened his body: "Zhao Fang, it's time to use people. The workshop where imported equipment is less than 100 meters away from where Li Qiang works. Is it OK?"

"Well, I'll go find him." Zhao Fangdong, this is an opportunity.
Chapter completed!